Thermal insulation on the outer wall heat preservation in what effect
of exterior wall thermal insulation for heat preservation nail is the anchor pieces, by galvanized screws, nylon tube rises and the fixed wafers. Depending on the insulation layer thickness, cent is a variety of specifications. Widely used in architectural decoration. I plant production of thermal insulation nails is widely used in the insulation of the building. Anti-aging, temperature shock resistance and corrosion resistance, cold heat; High bearing capacity, high pressure, good tensile performance; After loading is not easy to deformation, moisture, low vibration, noise absorption and sound insulation, etc. Easy installation, hammer, don't need special installation tool. Galvanized screw well solve the corrosion problems, good durability, and low heat transfer performance of nylon material, the winter is not cold bridge, high efficiency and energy saving.
nail insulation of exterior wall thermal insulation system can make the thermal insulating layer of the effect is particularly obvious: high compressive strength, can prevent the impact damage, low thermal conductivity, can reduce the thickness of the wall structure; Good dimensional stability, temperature changes in circumstances not deformation, can prevent the surface coating cracks, at the same time to provide smooth surface for wall decoration, as well as cement coating at the grass-roots level. Of the specifications of the heat preservation nail and there are many kinds of material. The use of the material is mainly according to the different areas and different climate. And the use of the specification based on the thickness of the insulation layer to decide. The installation is set according to the height of the floor number.
the generally used for building insulation heat preservation nail number is decided according to the area of the thermal insulation layer and the height of the floor. Generally under 10 layers of 6 - per square meter Eight, ten layer - With 8-20 layer 10. If more than 20 layers to use more than 10. So, if you know the height of the floor has to do the area of the heat preservation after we will be very convenient for you to calculate the thermal insulation engineering specific need how many insulation nails to construction.