The specifications of the outer wall heat preservation nail and material types

by:MPS     2020-09-21

of exterior wall thermal insulation for exterior wall insulation nails is the anchor, the galvanized screws, nylon tube rises and the fixed wafers. Depending on the insulation layer thickness, cent is a variety of specifications. Widely used in architectural decoration. Widely used in thermal insulation on the insulation of the building. Anti-aging, temperature shock resistance and corrosion resistance, cold heat; High bearing capacity, high pressure, good tensile performance; After loading is not easy to deformation, moisture, low vibration, noise absorption and sound insulation, etc.

outer wall heat preservation nail installation is simple, hammer, don't need special installation tool. Galvanized screw well solve the corrosion problems, good durability, and low heat transfer performance of nylon material, the winter is not cold bridge, high efficiency and energy saving.

exterior wall thermal insulation system of exterior wall thermal insulation nails can make the thermal insulating layer of the effect is particularly obvious: high compressive strength, can prevent the impact damage, low thermal conductivity, can reduce the thickness of the wall structure; Good dimensional stability, temperature changes in circumstances not deformation, can prevent the surface coating cracks, at the same time to provide smooth surface for wall decoration, as well as cement coating at the grass-roots level.

the specifications of the outer wall heat preservation nail and there are many kinds of material. The use of the material is mainly according to the different areas and different climate. And the use of the specification based on the thickness of the insulation layer to decide. The installation is set according to the height of the floor number. Commonly used for building insulation heat preservation nail quantity is according to the area of the thermal insulation layer and the height of the floor. Generally under 10 layers of 6 - per square meter Eight, ten layer - With 8-20 layer 10. If more than 20 layers to use more than 10.

I factory specializing in the production of exterior wall thermal insulation, insulation nails, geothermal card pin, bolts and a series of products, if you have about this aspect of the need, can call to contact with us, or to enter our website to leave a message.

this website: https://www. 国会议员, insulationpins。 com/news/399。 HTML keywords: exterior wall thermal insulation nails, nail wall heat preservation specifications, the outer wall heat preservation nail manufacturers
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...