Sub-station

MPS

Nylon rods is a very good self-lubrication material

by:MPS     2020-10-03

nylon rods manufacturer white nylon 66 + MOS2 ( A film) : this kind of nylon add the molybdenum disulfide, compared with nylon 66, improve its rigidity, hardness, and dimensional stability, but the impact strength declined, molybdenum disulfide grain formation effect improves the crystalline structure, bearing materials and wear-resisting performance are improved.

white nylon rods manufacturers 1, wear-resisting performance is superior, can increase the service life of the other. The coefficient of friction generally is 0. 1 - 0. 3, is the 1/3 of babbitt, 1/4 of bakelite, is a kind of very good self-lubrication material. At the same time, the nylon plate has very good cold heat resistance: the resistance to high temperature limit is 100 ° C, low - 60 ° C, in this case, to maintain a certain mechanical strength to work normally. Nylon plate mechanical properties is also very good, and have high tensile resistance, surface hardness, flexural strength and impact strength and high ductility.

nylon rods with good toughness, abrasion resistance, oil resistance, strong anti-seismic, good tensile, bending strength, and has the characteristics of small water absorption, good dimensional stability, and is used for processing various wear-resistant high strength parts. Products, widely used in plastic instead of steel, iron, copper and other metal material, is an important engineering plastics; Cast nylon instead of mechanical equipment wear parts, instead of the copper and alloys for equipment wear resistance. Is suitable for making wear parts, transmission parts, home appliance parts, automotive parts, wire rod to prevent the machine parts, chemical machinery parts, chemical equipment. Such as turbine, gear, bearing, impeller, shaft, dashboard, drive shaft, valve, blades, wire rod, high pressure washers, screws, nuts, seals, shuttle, set of Jane, axle housing connector, etc.

nylon rods manufacturers HeJian white plastic products co. , LTD. 1, wear-resisting performance is superior, can increase the service life of the other. The coefficient of friction generally is 0. 1 - 0. 3, is the 1/3 of babbitt, 1/4 of bakelite, is a kind of very good self-lubrication material. At the same time, the nylon plate has very good cold heat resistance: the resistance to high temperature limit is 100 ° C, low - 60 ° C, in this case, to maintain a certain mechanical strength to work normally. Nylon plate mechanical properties is also very good, and have high tensile resistance, surface hardness, flexural strength and impact strength and high ductility.

nylon is more and more widely, the application scope of effect is also more and more significant, people never know to know, from the trial to the application, step by step to realize the application of MC nylon excellence, importance, MC nylon has made significant economic benefits. Our company can design for you with all sincerity, open mold, production of stereotypes supporting products, all products specifications according to user requirements, in an effort to shall prevail, to the problem, applied technical problems using active cooperation, sincerely service for you.

this website: https://www. 国会议员, insulationpins。 com/news/607。 HTML keywords: nylon rods
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...