Sub-station

MPS

Nylon rods are widely used in chemical machinery, anti-corrosion equipment

by:MPS     2020-10-05

nylon rods with good tensile strength, impact strength, rigidity, abrasion resistance, chemical resistance, surface hardness, such as performance, high light transmittance, similar to optical glass, processing temperature is 300 - - - - - - - 315 ℃, molding processing, the need to strictly control the barrel temperature, melt temperature is too high will be caused by the degradation products, the low temperature will be because of the transparency of adverse effects and plasticizing products. Mold temperature to get lower, high mold temperature will reduce the transparency of products by crystallization. Glass fiber reinforced, its thermal deformation temperature is above 250 ℃.

it is widely used in chemical machinery, anti-corrosion equipment gear making bad material and parts. Wear parts, transmission parts, home appliance parts, automotive parts, wire rod to prevent the machine parts, chemical machinery parts, chemical equipment, etc.

nylon rods use

nylon rods with good toughness, abrasion resistance, oil resistance, strong anti-seismic, good tensile, bending strength, and has the characteristics of small water absorption, good dimensional stability, and is used for processing various wear-resistant high strength parts. Products, widely used in plastic instead of steel, iron, copper and other metal material, is an important engineering plastics; Cast nylon instead of mechanical equipment wear parts, instead of the copper and alloys for equipment wear resistance. Is suitable for making wear parts, transmission parts, home appliance parts, automotive parts, wire rod to prevent the machine parts, chemical machinery parts, chemical equipment. Such as turbine, gear, bearing, impeller, shaft, dashboard, drive shaft, valve, blades, wire rod, high pressure washers, screws, nuts, seals, shuttle, set of Jane, axle housing connector, etc.

HeJian special nylon rod bushing excellent mechanical properties. Nylon high mechanical strength, good toughness.

casting nylon rods after glass fiber reinforced, its thermal deformation temperature is above 250 ℃.

nylon rods is a kind of important engineering plastics, can replace mechanical equipment wear parts, instead of the copper and alloys for equipment wear resistance. Has good toughness and wear resistance force, oil resistant, seismic, stretching, bending strength, and has the characteristics of small water absorption, good dimensional stability, and is used for processing various wear-resistant high strength parts. Is suitable for making wear parts, transmission parts, home appliance parts, automotive parts, wire rod textile machinery parts, chemical machinery parts, chemical equipment. Such as turbine, gear, bearing, impeller, shaft, dashboard, drive shaft, valve, blades, wire rod, high pressure washers, screws, nuts, seals, shuttle, Jane, bushing connector, etc.

this website: https://www. 国会议员, insulationpins。 com/news/606。 HTML keywords: nylon rods, nylon rods applications
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...