--------------- Original Message --------------- From: Technical Solutions - SEA [web-implementation-support-sea-tel@google.com] Sent: 9/13/2022 10:20 AM To: mpsinsulationpins@gmail.com Subject: 谷歌广告 转化代码 (增強型) [ ]

Sub-station

MPS

Nylon rod bending strength is good, small water absorption, good dimensional stability

by:MPS     2020-10-03

nylon rods is a kind of important engineering plastics, can replace mechanical equipment wear parts, instead of the copper and alloys for equipment wear resistance. Has good toughness and wear resistance force, oil resistant, seismic, stretching, bending strength, and has the characteristics of small water absorption, good dimensional stability, and is used for processing various wear-resistant high strength parts.

black nylon rods, outstanding wear resistance, its friction coefficient is usually to 0. 1 - 0. 3 as phenolic plastic a quarter, and a third type of alloy is a kind of excellent self-lubrication material good mechanical properties. Its hardness is big, and have higher tensile, bending curvature and the impact strength and high extension of the compressive strength and the metal as its fatigue strength and the same level of the cast iron and aluminum alloy. Stable chemical stability, its chemical whether weak base, alcohol ester, hydrocarbons,

oils are not affected. The proportion of light, has good toughness, wear resistance, strong resistance to oil, the seismic characteristics of black nylon rods is suitable for making wear parts, transmission parts, home appliance parts, automotive parts, prevent mechanical parts, south China university of technology equipment, electrical insulation parts. Such as turbine, gear, bearing, impeller, blade, wire rod, high pressure washer, sealing ring, nut, screw, shuttle, sleeve, bushing connector, etc. , the product is widely used, is the material for the plastic instead of steel, nylon tensile strength and impact strength is higher, is a kind of common wear-resistant plastic, commonly used in processing of gears, bearing wheel, wear-resistant parts and rotating parts, switch, bearing, etc.

nylon ( White) : the material has the most excellent comprehensive performance, including mechanical strength, stiffness, toughness, mechanical vibration and abrasion resistance. These features, coupled with good electrical insulating ability and chemical resistance, make the nylon 6 as a 'universal' materials, used in the mechanical structure parts and maintainable parts manufacturing.

nylon ( Cream) : compared with nylon 6, the mechanical strength, rigidity, heat resistance and abrasion resistance, creep resistance is better, but the impact strength and mechanical damping performance degradation, is very suitable for the automatic lathe machining.

nylon ( Red brown) 4: compared with the ordinary nylon, nylon. 6 is the feature of rigid save power, good resistance to creep, in a wider temperature range is more heat aging. Therefore, the nylon 4. 6 for nylon 6, nylon 66, POM and PET in stiffness, creep and thermal aging, fatigue strength and wear resistance can not meet the requirements of the temperature field of the 'high' ( 80 - 150 ℃)

nylon 66 + GF30 ( Black) : compared with the pure nylon 66, nylon add this 30% glass fiber reinforced, heat resistance, strength and stiffness, creep resistance and dimensional stability, wear-resisting performance were increased, the maximum allowable temperature is higher.

nylon 66 + MOS2 ( A film) : this kind of nylon add the molybdenum disulfide, compared with nylon 66, improve its rigidity, hardness, and dimensional stability, but the impact strength declined, molybdenum disulfide grain formation effect improves the crystalline structure, bearing materials and wear-resisting performance are improved.

nylon rods is a kind of important engineering plastics, can replace mechanical equipment wear parts, instead of the copper and alloys for equipment wear resistance. Has good toughness and wear resistance force, oil resistant, seismic, stretching, bending strength, and has the characteristics of small water absorption, good dimensional stability, and is used for processing various wear-resistant high strength parts. Is suitable for making wear parts, transmission parts, home appliance parts, automotive parts, wire rod textile machinery parts, chemical machinery parts, chemical equipment. Such as turbine, gear, bearing, impeller, shaft, dashboard, drive shaft, valve, blades, wire rod, high pressure washers, screws, nuts, seals, shuttle, Jane, bushing connector, etc.

nylon rods main features:

mechanical strength, stiffness, hardness, high toughness, good ageing resistance, good mechanical damping capacity, good sliding resistance, excellent wear resistance, good machining performance, when used for precision control, no creep phenomenon, anti-wear performance good, good dimensional stability.

nylon rods is suitable for making wear parts, transmission parts, home appliance parts, automotive parts, wire rod to prevent the machine parts, chemical machinery parts, chemical equipment. Such as turbine, gear, bearing, impeller, shaft, dashboard, drive shaft, valve, blades, wire rod, high pressure washers, screws, nuts, seals, shuttle, Jane, bushing connector, etc.

nylon rod is made of nylon 1010 or MC nylon nylon rods is more wear-resisting, the wear-resisting is joined the wear resistant modifier nylon rods. For nylon 1010 resin, Adhesive) Basic material, adding all sorts of anti-friction material by mixing and extruding machine made of nylon 1010 modified plastics. Has a lower friction coefficient of pure nylon 1010 resin, higher PV value and better friction abrasion resistant properties, better self lubrication.

this website: https://www. 国会议员, insulationpins。 com/news/630。 HTML keywords: nylon rods
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...