--------------- Original Message --------------- From: Technical Solutions - SEA [web-implementation-support-sea-tel@google.com] Sent: 9/13/2022 10:20 AM To: mpsinsulationpins@gmail.com Subject: 谷歌广告 转化代码 (增強型) [ ]

Sub-station

MPS

Heat preservation nail is mainly used in what way

by:MPS     2020-10-18

bar consists of three parts: one is made of nylon sleeve; Second, the casing of galvanized steel screws; Three is the nylon disc before casing. Its length varies according to the thickness of insulation board. Widely used in wall BaoWenWu anchorage. Heat preservation nail has anti-aging, temperature shock resistance, anti-corrosion, cold heat; High bearing capacity, high pressure, good tensile performance; After loading is not easy to deformation, moisture, vibration, and good thermal insulation, etc.

heat preservation nail installation is simple, do not need special installation tool. Galvanized screw well solve the corrosion problems, good durability, and low heat transfer performance of nylon material, the winter is not cold bridge, high efficiency and energy saving. Heat preservation nail

bar is widely used in the insulation of the building. Anti-aging, temperature shock resistance and corrosion resistance, cold heat; High bearing capacity, high pressure, good tensile performance; After loading is not easy to deformation, moisture, vibration, absorb noise and good insulation characteristics, easy to install. Heat preservation nail is insulation board fixed on the wall of a kind of special engineering plastic bolts.

heat preservation nail is insulation board fixed on the wall of a kind of special engineering plastic bolts. Of exterior wall thermal insulation for heat preservation nail is the anchor pieces, widely used in building decoration, wall BaoWenWu anchorage. By galvanized screws, nylon tube rises and the fixed wafers. Depending on the insulation layer thickness, cent is a variety of specifications. Exterior wall thermal insulation thickness using 8 * 8 cm 115 large anchors.

according to JG158 - 2004 external wall thermal insulation standards; JG149- 2003 'eps thin plastering exterior insulation system, standard, a single heat preservation nail by residual 0 or higher. 3 0 kn anchor pipe diameter. 7 - 0. 8 coefficient of thermal conductivity '0. 06 anchor nail outside dish; 50 mm of exterior wall thermal insulation for heat preservation nail is the anchor pieces, by galvanized screws, nylon tube rises and the fixed wafers. Depending on the insulation layer thickness, cent is a variety of specifications. Widely used in architectural decoration.

the People's Republic of China Ministry of Housing and Urban-Rural Development in February 2012 issued new standards increase to a clear indicator of the added value of heat, heat preservation for outside dish for 60 mm. The new standard started on August 1, 2012.

outer wall heat preservation nail and exterior wall anchoring nails, exterior wall anchoring bolt, etc. Outer wall heat preservation nail of exterior wall thermal insulation system is mainly used for the insulation board is fixed, plastic expansion insulation nails, divided into a variety of specifications, according to the thermal insulation layer of thick, widely used in architectural decoration. Widely used in thermal insulation on the insulation of the building.

this website: https://www. 国会议员, insulationpins。 com/news/363。 HTML keywords: insulation nails, nail insulation, heat preservation nail prices
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...