Sub-station

MPS

Following a force good outer wall heat preservation nail installation is simple

by:MPS     2020-09-22

outer wall heat preservation nail of exterior wall thermal insulation system is mainly used for the insulation board is fixed, plastic expansion insulation nails, divided into a variety of specifications, according to the thermal insulation layer of thick, widely used in architectural decoration. Widely used in thermal insulation on the insulation layer of the house

outer wall heat preservation nail is introduced:

has anti-aging, temperature shock resistance, anti-corrosion, cold heat; High bearing capacity, high pressure, good tensile performance; After loading is not easy to deformation, moisture, vibration, absorb noise and good insulation characteristics, easy to install. Heat preservation nail is insulation board fixed on the wall of a kind of special engineering plastic bolts. Heat preservation nail consists of three parts:

a is made of nylon sleeve;

2 is casing galvanized steel screws;

three's nylon disc (before the casing To gland insulation board) 。 Its length varies according to the thickness of insulation board.

are widely used in wall BaoWenWu anchorage. It has anti-aging, temperature shock resistance, anti-corrosion, cold heat; High bearing capacity, high pressure, good tensile performance; After loading is not easy to deformation, moisture, vibration, and good thermal insulation, etc. The installation of the installation is simple, do not need special tools. Galvanized screw well solve the corrosion problems, good durability, and low heat transfer performance of nylon material, the winter is not cold bridge, high efficiency and energy saving.

outer wall heat preservation nail performance parameters is introduced:

according to JG158 - 2004 exterior insulation standards;

  JG149- 2003 'eps thin plastering exterior insulation system, standard, a single heat preservation nail by residual 0 or higher. 3 0 kn anchor pipe diameter. 7 - 0. 8 coefficient of thermal conductivity '0. 06 anchor nail outside dish; 50 mm of exterior wall thermal insulation for heat preservation nail is the anchor pieces, by galvanized screws, nylon tube rises and the fixed wafers. Depending on the insulation layer thickness, cent is a variety of specifications. Widely used in architectural decoration. The factory production of thermal insulation nails is widely used in the insulation of the building. Good corrosion resistance performance and anti-aging performance, in - 40 ℃ to + 80 ℃ temperature environment long-term stability. Heat preservation nail shock resistance, weathering resistance, resistance to fracture, durable and

types of exterior wall thermal insulation nails:

fission insulation heat preservation nail nails and connected. Insulation nailed the insulation on the market of basic it is an organic whole, easy to use. The new standard 158 - at the same time 2004 also have to implement new standard is: a single nail insulation bearing capacity; '0. 8 kn coefficient of thermal conductivity '0. 004 heat preservation nail outside dish 56 mm anchoring pieces of layout. Extruded board exterior insulation system anchor pieces installation number; 1-10 layer on average 6 / ㎡, 11 - 20 an average of seven/square meter 21-26 layer 9 / ㎡. Any area is greater than zero. 1 ㎡ monolithic pull must add the anchoring piece, the number depending on the shape and site condition; In Yang Angle, under the eaves, around the edge of the hole, should be increasing the density of the anchorage parts, its distance is not more than 300 ㎜, is apart from the edge at the grass-roots level is not less than 60 mm.

this website: https://www. 国会议员, insulationpins。 com/news/559。 HTML keywords: exterior wall thermal insulation nails, nail insulation
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...